null

Snabb Strut Bar Conversion Kit, Volvo P2 Models

$109.99
$79.99
(You save $30.00)
  • SKU: KIT-400001
  • Availability: Normally ships in 1-2 business days
  • Share This

    DESCRIPTION

    Increase the handling of your Volvo with a Snabb Strut Bar Conversion Kit for the P2 chassis models: Volvo S60, V70, XC70, S80, XC90.

    Strut bars counteract the flex caused by vertical suspension loads on a vehicle's strut towers by tying the two towers together, reducing chassis flex. Volvo's soft rubber mounts lead to sloppy handling and poor driving feedback. Snabb's Strut Bar Conversion Kit solves this with one-piece, 6061-T6 solid aluminum mounts.

    With regards to increased engine vibration present in the cabin, don't be concerned. Snabb's Strut Bar Conversion Kit does not interfere with the stock engine torque arm bushings, which may cause increased vibration when replaced with polyurethane upgrades. This is due to the fact that the engine mount system uses four different rubber mounts for the top engine mount - the large engine torque bushing, a smaller secondary torque arm bushing, and the two engine bar mounts. Even though you are replacing the two engine bar mounts with our Strut Bar Conversion mounts, the two primary engine torque bushings, which are in reality the main engine mounts, remain untouched. The two remaining engine torque bushings are same two mounts that Volvo has been using on it's cars for decades. This is why there is no difference in cabin vibration with our Strut Bar Conversion.

    Before (Stock):Snabb Strut Bar Conversion Kit:
    p2strut-before.gif p2strut-after.gif

    Snabb Strut Bar Conversion Kit Benefits:

    • Improved chassis rigidity leads to reduced understeer, better tire wear, and less metal fatigue in the strut tower area
    • Replaces Volvo's weak rubber engine bar mounts
    • Eliminates unnecessary engine bar movement
    • Maximizes engine power/improving transmission shifting
    • Converts the engine bar into a strut bar

    Snabb Strut Bar Conversion Kit Features:

    • CNCed from 6061-T6 Aluminum via one-piece construction for high strength
    • Matte Black hard anodized coating for lasting beauty and corrosion resistance
    • Installation takes 15 minutes with basic hand tools

    Installation Instructions: pdf.gif

    TECHNICAL DETAILS

  • Unit of Measure: Sold in set of 2
  • REVIEWS